MOT tests can be carried out on your car up to 1 month before the expiry date of an existing UK MOT certificate provided that you have a current MOT certificate. On passing the MOT, you will then receive a certificate valid from the date of expiry of your existing MOT.
Contact Us Today
The current cost of an MOT test is £54.85. This excludes any required actions or retests.
The following list describes what is involved in the MOT checks. But please remember this is not a service, which you should do to ensure the safe and economical running of your vehicle.
Registration plate
Condition, security, legibility and format of letters/numbers.
Lights
Condition, operation, security and correct colour. The headlamps will also be checked to see if the aim is correct.
Steering and suspension
Condition, operation, security and correct colour.
Wipers and washers
Operate to give the driver a clear view of the road.
Windscreen
Condition and driver’s view of the road.
Horn
Correct operation and type
Seatbelts
All seatbelts installed are checked for type, condition, operation and security. All compulsory seatbelts must be in place
Fuel system
No leaks, fuel cap fastens correctly and seals securely. The fuel cap will need to be opened. Make sure the key is available.
Exhaust emissions
Vehicle meets the requirement for exhaust emission. These vary on the age and fuel type of the vehicle.
Exhaust system
Complete, secure, without serious leaks and silences effectively.
Vehicle structure
Free from excessive corrosion or damage in specific areas. No sharp edges.
Doors
Open and close. Latch securely in closed position. Front doors should open from inside and outside the vehicle. Rear doors may need to be opened to gain access to testable items.
Wheels and tyres
Condition, security, tyre size and type, and tread depth. Spare tyres are not tested.
Brakes
Condition, operation and performance (efficiency test). Suitable vehicles will be tested on a roller brake tester. Vehicles such as those with permanent 4-wheel drive will be tested either on a suitable road using a properly calibrated and maintained decelerometer or, if one is installed at the test station, a plate brake tester.
